In tune with our commitment to adhere to high Quality standards, we have gained expertise in the manufacture of hydraulic cylinders, manufactured under the brand name ADVANCE. We manufacture Hydraulic Cylinders / Jacks under the brand name ADVANCE. Our cylinders range from Bore 25 x Rod 12 x Stroke10 mm till Bore 900mm x Rod 600 X Stroke 5000 mm. with working pressure up to 600 Kg/cm2 / 10,000 PSI . Hydraulic jack manufacturers, along with double acting hydraulic cylinders and hydraulic cylinder suppliers, hydraulics cylinder manufacturer.
To stick to our high Quality standards we use only Imported Sealing & Guidance Systems. All our honed tubes are micro finished to a Ra value less than 0.3 microns. All Hydraulic Cylinders are manufactured using imported Honed tubes to suit our customer requirements. All piston rods are ground and hard chrome plated with chrome thickness up to 30Microns.
hydraulic jacks, hydraulic cylinder manufacturer, double acting hydraulic cylinder, tie rod hydraulic cylinder, welded hydraulic cylinders, hydraulic cylinder suppliers, hydraulic cylinders manufacturer, hydraulic cylinders manufacturers, hydraulic cylinders suppliers, hydraulic piston cylinder, standard hydraulic cylinders.

Salient Features
* Highly Automated but very simple in operation through one no.
* Manually operated Direction Control Value.
* Single compact unit mounted over channel.
* No Civil Foundation is required.
* The above data are indicative and not binding.

To meet the growing demand of the various industries we offer quality-lifting tables such as scissor lift table and die loader. Manufactured using qualitative grades of raw material these are widely used for precision functioning and perfect lifting of material to a suitable height.

Our cylinders range from Bore 25 x Rod 12 x Stroke10 mm till Bore 400mm x Rod 100 X Stroke 6000 mm. with working pressure uotp 15 kg /cm2 or 200 PSI
:: Media : Air
:: Mountings & Accessories
:: Seals : Nitrile, Viton on Request
:: Temperature : 0c to 80c ( For Nitrile Seals )
:: Piston : Upto 4" Aluminum & From 5" to 14 " cast iron
:: Pressure : 0.5 to 10.2 Kgf/cm, high pressure on request
:: End Covers : Up to 4" Aluminum Die Casted & powder coated.
:: From 5" to 16" close grain cast iron & powder coated.
:: Cylinder Barrel : Upto 4" Dia. Brass, Aluminum, MS ( Honed & Hard Chrome Plated)
:: From 5" Dia. to 16" Dia. MS ( Honed & Hard Chrome Plated) Powder Coated on Request