All cylinders, carry a standard warranty, period of 12 months
Whether it is the standard, tie rod or welded hydraulic cylinder, or the custom –
built threaded and block / Clamp hydraulic cylinder, we stick to our high Quality,
Standards and ensure, that only imported sealing and guidance systems, are always used.

Salient Features

Honed Tube: All the tubes are micro honed for superior surface finish with.

Ra value less than 0.3 microns.

Piston rod: En – 8 to En – 353 are ground and hard chrome plated with.

25 microns minimum plating thickness.

Piston: Single piece design to accommodate low friction seals.

End covers: Accurately machined cast iron / mild steel plates.

Sealing systems: Low friction seals with operating Pressures upto 80 mpa from BUSAK and SHAMBAN.

Guidance systems: Turcite / Phosphor bronze bushings to ensure positive guidance.